top of page
—Pngtree—neon light decorated racetrack in_3708109.jpg

OFF ROAD RULES

Modified Modern Buggy:​

  • Any modern 1:10th scale 2WD or 4WD buggy kit

  • The front bumper should be the original or copy of the part supplied within the kit and
    must not exceed to overall width of the car.

  • All buggy's must be free from pointed or sharp edges

  • Ride height: Must be no less than 12mm and is subject to spot checks to prevent damage to the carpet​

  • Motor: Any BRCA approved brushless motor designed for 1:10th RC Racing​

  • ESC: Any BRCA approved brushless electronic speed controller for 1:10th RC Racing​

  • Battery: Any 6 cell NiMH or BRCA approved 2S LiPO firmly secured into the car​

  • Gearing: Open choice

  • ​Wheels/Tyres: Standard 1:10th scale buggy wheel and rubber tyre designed for carpet racing as per the approved list below

  • ​Bodyshell: Any bodyshell designed for 1:10th scale buggy racing-Bodyshells must remain securely fastened to the car using either body clips or Velcro

  • Wings: Wings are permitted but must not be wider than the car.Front wings may be used as per kits but must not have sharp edges

Vintage Buggy:

  • Any 1:10th scale 2WD or 4WD Buggy Kit from 1998 or before

  • The front bumper should be the original or copy of the part supplied within the kit and
    must not exceed to overall width of the car.

  • All buggy's must be free from pointed or sharp edges

  • Ride height: Must be no less than 12mm and is subject to spot checks to prevent damage to the carpet

  • ​Motor: Maximum 10.5t brushless motor or any 540 style brushed motor designed for 1/10th RC Racing. Spot checks will be made to ensure motor spec is no greater than 10.5t

  • ​ESC: Any BRCA approved brushless or brushed electronic speed controller for 1:10th RC Racing​

  • Battery: Any 6 cell NiMH or BRCA approved 2S LiPO firmly secured into the car​

  • Gearing: Open choice

  • ​Wheels/Tyres: Standard 1:10th scale buggy wheel and rubber tyre designed for carpet racing as per the approved list below

  • ​Bodyshell:

  • - A vintage "cab back" style buggy bodyshell

  • - Bodyshells must remain securely fastened to the car using either body clips or Velcro

  • - Rear wings are permitted but must not be wider than the car​

Generic Rules:

1. All cars are subject to random checks and scrutineering at any time

​

1. LiPO batteries MUST be on the BRCA approved battery list and all club rules relating to batteries must be adhered to

​

2. Batteries MUST be charged in accordance with manufacturers guidelines, but no more than 2c. eg: 4000mA max 8A charge

​

3. All LiPO batteries MUST be charged in a LiPO sack or box, swollen batteries ARE NOT permitted to be used

​

4. All shock towers MUST have carpet protectors fitted. You will be asked to leave the track if protectors are not fitted

​

5. Shock tower end MUST be covered to prevent damage to carpet when car is inverted

​

6. Spur gear covers MUST be covered to prevent injury when handling the car

​

7. Drivers MUST marshall the next heat after their race. We ask you put your car back on your table and swiftly return to marshall points

​

8. This is a family club so we ask that you refrain from swearing

​

9. The use of tyre warmers IS NOT permitted

​

10. Gyros ARE NOT permitted (this may affect some RTR cars)​

​

11. Only tyres from the approved tyre list below can be used:

          - Please note tyre additive IS NOT permitted

​

  Schumacher (Yellow compound only):

          -Cactus

          -Azami

          -Cactus Fusion

          -Cactus Fusion 2

          -Fusion

          -Cut Stagger

          -Splinter

          -Shard

​

  Jetko:

          -Challenger 2WD & 4WD rear (JK2004CM & JK2004CMGW)

          -Challenger 4WD front (JK2002CM  & JK2002CMGW)

          -Arena 2WD front (JM200CM & JK2001CMGW)

© 2023 by Indoor Raceway . All Rights Reserved.

bottom of page